Shower cleaning
1, tap the surface with a soft cloth should be kept (without impurities) dip gently wipe with a cleaning agent. Avoid using metal wire or with a group of hard particles such as scouring pad. In addition, the phase must not be hit with a hard surface that bumps Tap.
2, use the following cleaning agents to remove the mask and thick solid deposits: a mild liquid glass cleaner, pure clear liquid glass cleaner, acid-free, non-abrasive gentle liquid or the powder is completely dissolved, non-abrasive polishing agent solution .
3, do not use any abrasive cleaners, cloth or paper cloth; Do not use any acid based cleaners, polishing abrasive cleaners or rough.
4, the pressure of not less than 0.02mpa (ie 0.2kgf/cm2) in the case, in use for some time, found out the water decreases, water heater or even turn off the phenomenon, can be at the head of the outlet at the light Unscrew the light screen cover, remove impurities, generally can be resumed as ever.
Maintenance of shower faucet
1, the installation need to turn on the water faucet before red, wash water in the sediment impurities out of the mounting hole of debris, and check the box of accessories do not mix into the impurities, side-sum game, or wear Taocifaxin.
2, toothpaste with a soft cloth to clean the painted surface, then clean the surface with water. Can not use alkaline detergent or with scouring pad, steel ball to clean, so as not to damage the surface plating.
3, single-handle faucet in the course, to slowly open and close; two-handle faucet, you can not die off too, otherwise it would seal off the bolt, causing not off, just not water.
|
